Capability & Capacity | Table diameter Max. swing Max. height from table top to ram bottom Max. cutting height Max. cutting diameter Max. cutting force of ram Max. table load |
inch inch inch inch inch lbf lbs |
89.7 128.7 97.5 60.4 128.7 5,508 33,000 |
Travel | Horizontal travel of rail head (X-axis) Vertical travel of ram (Z-axis) Vertical travel of arm (Not NC axis) |
inch inch inch |
-54.6 35.48 35 |
Table | Table speed (Low) Table speed (High) Number of table speed ranges Max. torque |
rpm rpm -- ft-lbs |
2~60 8~400 2 23,153 |
Feedrate | Rapid traverse rate of rail head (X-axis) Rapid traverse rate of ram (Z-axis) Feedrate (X, Z-axis) Elevating speed of arm |
ipm ipm ipm ipm |
393.7 295.28 0.047~8.74 275 |
Ram | Selection | inch | 9.84 x 9.06 |
Tool | Type of tool shank Type of pull stud |
-- -- |
"7/24 taper JIS 50T and Dia. 145mm flange 50PU based on JIS B 6339-1992 1-8UNC |
Motor | Table drive motor (30min/cont.) | HP | VAC 60/50 |
Machine size | Height Floor area Machine weight |
ft ft lbs |
209.8 247.6 x 200.8 55,000 |