Ohtori GMT-760S
Double Column 5-axis Machining Center
| Capacity | Travel X axis Travel Y axis Travel Z axis Travel A axis Travel C axis Spindle nose to table surface min (Table: horizontal position. Spindle: Vertical.) Spindle nose to table surface max (Table: horizontal position. Spindle: Vertical.) Distance from table top to spindle center with vertical movement min (Spindle: Horizontal) Distance from table top to spindle center with vertical movement max (Spindle: Horizontal) Distance from Table center to Spindle center min (Ｘ axis movement, Table horizontal position) Distance from Table center to Spindle center max (Ｘ axis movement, Table horizontal position) Distance from Table center to Spindle center min (Ｙ axis movement, Table horizontal & vertical position) Distance from Table center to Spindle center max (Ｙ axis movement, Table horizontal & vertical position) Table length Table width Max load on table Table height from floor |
inch inch inch ° ° inch inch inch inch inch inch inch inch inch inch Ibs inch |
30 35.4 23.6 -120～30 360 4.7 28.3 -- -- -12.4 12.4 -17.7 17.7 23.6 23.6 1,100 46.1 |
| Feed | Rapid traverse X, Y, Z axis Rapid traverse A axis Rapid traverse C axis Cutting speed X, Y, Z axis max Cutting speed A axis max Cutting speed C axis max |
ipm min-1 min-1 ipm min-1 min-1 |
1,890 30 30 1,890 30 30 |
| Spindle | Spindle taper Spindle speed range Drive motor（high speed coil) Const Drive motor（high speed coil 30min Drive motor（high speed coil 10min Drive motor（Low speed coil) Const Drive motor（Low speed coil) 30min Drive motor（Low speed coil) 10min |
-- rpm HP HP HP HP HP HP |
No.40 100~15,000 25 -- 30 20 25 25 |
| ATC | Tool shank Magazine capacity Standard Max.tool diameter with adiascent Max.tool diameter without adiascent Max.tool lengh Max.tool weight |
-- tools inch inch inch lbs |
CAT40 40 3.2 4.9 11.8 22 |
| Machine size | Overall machine height Floor space length Floor space width Machine weight Overall power requirement |
ft ft ft lbs KVA |
11'1'' 13'2'' 13' 38,590 64 |